One more done…adding reflective paint to the posts and putting up the French house number!   I found the house number on eBay UK–a real French one!  I needed to spray some laquer on it to seal the chipped areas on the back (to prevent rust).  Then I finally went to screw it to the post and discovered the screw holes were too close to the outside edge of the 8×8 post which was, of course, not quite 8 inches wide.  Sigh.  So that meant glue up some leftover baseboard on the skinny edge to make a wide-enough back, prime, paint, then screw backing board to the post, then the numbers to the backing board!

FINALLY got the house number up on the post!  That’s the first part of the driveway…a long skinny bit of land that takes you up to  our real lot, in the center of the “block”

But at last, what a concept.  I don’t have to say “There are three driveways, take the middle one, you won’t be able to see the house but we are really up there.”  Instead I can say take the driveway with the 339 on the post!  YEAH!

Hi all!  I’m happy to report that if you want, you can now sign up for my September 5th Web Seminar on the Mechanics of Machine Quilting with Interweave/Quilting Arts!

Learn how to get ready to machine quilt with Sarah Ann Smith. Set up your space and materials so they help (and don’t hinder) you!

Here is the link:
To buy it in the store: http://www.interweavestore.com/mechanics-of-machine-quilting

And here’s what QA/IW says about the live Web Seminar:

• Preparing your workstation and tools for an effective quilting session
• Which needles and thread are best for specific projects
• Proper sewing machine tension
• How to baste a quilt in order to get smooth, even layers
• Practicing good ergonomics so you’re comfortable while you’re quilting
• Making sure your vision is in good standing to accurately see your projects and workstation
• And more!

Practice makes perfect, and machine quilting is no exception. Sarah will not only run you through the elements of this process, but she will also encourage you to be comfortable with your beginner status. Don’t miss out on this opportunity to learn machine quilting techniques from the start!

Don’t worry if you can’t tune in on the 5th!  The Seminar is recorded and you can listen in at any time at your convenience.  To learn about how this works (you’ll need an internet connection for your computer or tablet), visit the hotlink above.

There will be more links and information in the coming days.  There is already something on FaceBook!
Facebook: https://www.facebook.com/QuiltingDaily
Twitter: https://twitter.com/QuiltingDaily
Pinterest: http://pinterest.com/quiltingdaily/

And I’ve added a link to my  Pinterest boards–I’d love it if you’d follow me!

All of the boards are here:  http://pinterest.com/sarahannsmithq/boards/

and the one just for teaching and publications:

http://pinterest.com/sarahannsmithq/sarahs-teaching-and-publications/

Remember when I was painting the exterior doors and screen doors?

The formerly dark brown (lower right corner) door is primed and ready to be painted!

Good news–especially for me—they are DONE!

The “front” door–this is actually the screen door to the entry/kitchen. Like all good Maine houses, the “proper” front door is near the living room. No one uses it unless they are going from the living room to the porch. Everyone else uses the REAL front door…into the kitchen!  PS: no one has anything to fear from our pug…he only wants to love the universe!

The camera is acting weird (and for what it –a Canon G12– cost, it shouldn’t be having the problems it is currently having; I think I should buy a new memory card, as it seems to be wreaking havoc!), so the color looks off, too light.

And here is a photo from the inside/entry/kitchen side:

Better/more true color on this one. The screen door had been painted that ugly dark brown on the inside also (which is OK as a color, just not on the outside of ALL of this low ranch-style house).  I used a caramel color that matches the walls.  Once our carpenter finishes the new latchplate for the new door handle (a lever that my arthritic hands can actually OPEN), I’ll also paint the dark brown  trim on the door jamb inside the screen door.  And in a few years when the outside of the hosue needs painting, it will be a soft gray with white trim like the garage.

Today, I’m celebrating 8 years of blogging (SHRIEK…how can it be that long?) by announcing my upcoming Quilting Arts Webinar, an online seminar on getting started in Machine Quilting, which will be on September 5, 2013, at Noon East Coast (US) time.  I’ll be talking all about what you need to do to get started in machine quilting–the prep work that goes before the actual quilting.  And to answer the obvious question first, What’s a Webinar?, it is an on-demand web seminar.

Tips and tricks for getting ready to Machine Quilt in Sarah Ann Smith’s              Quilting Arts Webinar, Sept. 5, 2013

The links and advertising for the webinar will go live soon at Interweave.com, but I wanted to give all of  you a heads-up! and let you know first!  You’ll need an internet connection (which you obviously already have if you are reading this!).  Once you sign up, you’ll receive instructions on how to open the page in your browser and “sign in” and listen in (and see some slides) and even ask a question.  The Webinar will run 60-90 minutes.  If you can’t tune in at Noon on the 5th or need to leave, that’s OK because they record the webinar and you can listen in when it is convenient for you!!

When I teach, I like to tell students that machine quilting is sorta like painting a house:  if you don’t sand and spackle and prime that peeling paint on the windowsill, you’re not gonna get a good result.  It doesn’t matter if you have the best paint, paintbrush, and painter, if you don’t get things prepared well, your results won’t be as good as if you DID prepare AND understand what it is you are doing and why.  So I’m going to talk about the “whys” of the prep part of machine quilting.  Then you’ll have your machine working WITH you, not against you.  I hope some of you will surf on in and join in the webinar.  If you can’t be with us at noon on Sept. 5, however, you can STILL download a recording of the webinar, all the information I share and the Question and Answer session.

I’ll confess right now:  at first I didn’t “get” why anyone would pay $20 or more for a webinar.  Then I listened to some of the QA webinars, and OMG what a TON of information.  For a modest price, and you can listen in at your convenience.  They were fabulous!

One of the goodies that comes with attending the Webinar is QA often gives attendees a discount for future purchases (though I’m not sure how long the discount is valid) including my book, which they carry.  THEN,  my DVD on “Art Quilt Design From Photograph to Threadwork with Fabric Collage and Machine Quilting” will be available for download in mid-September and on DVD about October 1st!  WOOT!  More on that in a future post.  (Yes, I am teasing you!)  More, including hotlinks, when they go live!

Lookit what arrived in the mail today!   My September/October issue of Machine Quilting Unlimited, with my Metallic Threads article mentioned ON THE COVER!  I’m thrilled with the layout and how the article looks and reads, and hope you will be too.  You can find MQU at Barnes and Nobles (on Sept. 1) as well as order this and back issues online, here.

Machine Quilting Unlimited…notice the Metallic Threads on the left, that’s my article! WOOT!

I LOVE Metallic threads, and once you learn a few basics it really isn’t difficult to use at all!   My book, ThreadWork Unraveled, talks all about threads including metallics, but for the skinny on just the metallics, it’s covered in this six-page (!!!) article.

The opening spread on the Metallic thread article. The golden eagle quilt on the left, 13 x 13 inches, is a wholecloth quilt using one of my murky “background / forest floor” hand-dyes.

I was thrilled that my buddy Jim VanderNoot, who lives in Pennsylvania but will be returning to the best place on Earth (well OK, the are other really great places too, but Maine ROCKS) when he retires in a few years (or sooner we hope in the local guild…Jim is a welcome addition!), let me use his “Celebrate!” quilt for the article.  Jim’s a fabulous quilter, so I can’t wait until he and his wife get to move north.  Thanks, Jim!

Here’s the last page of the article with Jim VanderNoot’s quilt on the top–love his sense of whimsy and UBER LOVE his quilting. That’s my Garuda Dances Under the Ocean Moon on the bottom, made with Princess Mirah Bali batik fabrics.

AND…drum roll for thorough readers…. MQU has a “Web Extra,” a free PDF download of my 2008 article on sewing machine needles.  Click here to visit MQU’s Web Extras page and find the link.

I’ve finally finished the major house chores–well, except for painting ALL the trim on the garage–done, so hope to get back to a regular blogging schedule soon!   In the meantime, hope you can lay your hands on a copy of this magazine and enjoy this and the other great articles.  MQU is  one of those magazines that I read cover to cover AND keep all the back issues!   Thrilled to be able to write for them again.

P.S.  And one benefit to this article… in the past I had avoided bobbin work like the plague.  But I thought it would be good to include bobbin work in the article.  Guess what… I now LOVE using the Razzle Dazzle thread–I figured out a way to use it and still fill my need to SEE what I’m doing with something that needs to be worked upside-down!   So add one more technique to my arsenal…and a few more spools of thread to my stash.