As soon as it came out of the box it went on…fit perfectly (thanks to borrowing one of his existing shirts!)
The first thing I made on the splendid new M7 Continental from Janome was something I haven’t made in decades: a button down tailored shirt! Anyone who knows Joshua knows that he is all about good food, perhaps starting with donuts. In fact, Joshua and Ashley’s wedding cake was a tower Joshua made of donut holes from Willow Bakery in Rockport! He also loves shirts with a sense of humor: sushi rolls, watermelon, lobsters. So I decided I wanted to make him a shirt for Christmas. And I succeeded beyond my wildest expectations in part due to the excellent sewing of the M7. There’s even a video below of making a buttonhole!
In the box ready for going under the tree, and looking professionally made if I do say so myself! The label was purchased at Fancy Tiger Crafts in Denver–when I was taping for The Quilt Show I had a day to play and met friend Sandra Wheeler (hullo SandyAngel!) who took me out and about. The label reads “made with love {and swear words},” which I figured correctly would make Joshua laugh.
I used the Men’s All Day Shirt Pattern from Liesl + Co patterns. It was my first time using a downloadable pattern where you print and then tape together the pieces. If you download the free Adobe Acrobat software (not just your built in PDF reader) you can turn off the “all sizes” so it prints ONLY the size or sizes you want so you don’t have to navigate all those lines that end up nearly on top of each other. By measuring Joshua’s existing shirt, I was able to figure out which size would be best (Medium) but with the Large collar/neck stand. My only issue was when I combined the sizes. I should have printed the neck line of both patterns SEPARATELY (instead of on the same sheet), then traced the size large and lined it up properly. It took a while, with astounding and much appreciated personal replies from both Liesl and her husband Todd with troubleshooting suggestions, before I figured out what I was doing wrong. Kudos for the service as well as the pattern!
Sewing down the underneath side of the front, where the buttons will go
Needle moved to the far left.the stitched fold-back, the buttons will go on the other side.Look at how perfect that stitching is! It sure helps to have a machine that is so precise.
Using the included edge stitch foot, I was able to get absopositively perfect stitching. The first of the four photos above shows the underneath side of the shirt opening, using the edge stitch foot to sew down the turn-under. The second image shows the Janome M7 Continental screen (other Janome machines work similarly) with the needle set to the left. Because of the tiny increments in needle placement, I could get the stitches to form the exact distance I wanted from the edge. Third photo (top right) is a detail of that stitching. And the large image is the button band, stitched. I can’t believe it looks so good! There’s a video just below these still photos.
There are a couple screens of buttonhole options, but I used the basic one. Note the QR code in the bottom left corner (more info below).The manual explains the different purposes of the many buttonholes.First, you can select from a wide variety of buttonholes. I went for the standard (after all, I hadn’t sewn a buttonhole in over two decades!). Using the AcuSpark app (free on the App store, works with the M7 and a few other Janome’s), you open the app on your phone/device, scan the QR code in the bottom right of the machine’s screen (photo on left). This takes you to a tutorial within the app.As you can see from the screen shots, the tutorial walks you through the process step by step. Easy peasy…my kind of sewing!Here’s the app telling you how to make a buttonhole!This is what that buttonhole foot looks like in real life. You slide the button into the back, attach the foot to the machine, and it makes the perfect sized hole every time. I kid you not, I make SEVEN buttonholes, perfectly, in seven minutes, and most of that was repositioning to the next spot!More instructions on attaching and using the special buttonholer foot.And how to finish the buttonhole.This Nancy Zieman (oh how I miss her!) tool from Clover is an improvement over the old-school metal one. Although I have a fondness for the metal one, this version allows you to center the ruler exactly on the button band and mark your buttonholes. The darker green slider notches into the grooves so it doesn’t slide up and down the center as you work. I wondered when I bought it why I thought I needed a newer (plastic, yuck) version. Now I know. Once again, smarter sewing.
(Alert: even geekier pattern and garment sewing paragraph!) From the pattern, I also learned a new process for sequence of sewing and attaching the collar and collar stand. Instead of sewing the stand to the neckline, inserting the collar, and closing it up where the collar meets the neck band, the pattern has you sew collar and stand together, then sew the inside of the stand to the inside of the shirt and topstitch the collar to the shirt body. Ended up with absolute precision and perfection!!!!!!
LOOKIT how perfect that turned out! The only thing I would change on the next one (and yes there will be more for both sons) is to use a slightly less crisp interfacing so the collar stand holds up but isn’t quite so stiff.
So, with 50 years of sewing experience (albeit minimal garment making in the past three decades), an excellent pattern that taught this greying sew-ist a couple new things, and the incredible precision of the Janome M7 Continental machine, I am a seriously happy camper. Even better, Joshua loves his shirt!
Part of every new year should be learning new things…and I’m starting with the Accuquilt GO!
As part of the Michael Miller 2020 Brand Ambassador program, we received the Ready. Set. GO! Ultimate Fabric Cutting System from Accuquilt. It includes an AccuquiltGO! plus the 8″ Qube (a set of dies to cut shapes often used in piecing 8″ blocks) and a ginormous die to cut my own 2 1/2″ strips. I’ve never seen one of these used in person, let alone done it myself. They are supposed to be lots faster than traditional rotary cutting and more accurate to boot. That makes two things where I need improvement–grin!
Lookit those amazing colors…don’t you want to dive in face first?
A while back, I was deliriously delighted to learn I had WON all 214 colors (above and below) of Michel Miller’s Cotton Couture (this was before I even applied for the Brand Ambassador program). I’ve been wanting to make a quilt I shall call “214.” As I’ve been waiting to upload this post, I realized that I can use the AccuquiltGO! to do the majority of the cutting, even the sashing! If I use the die for 2 1/2″ strips, I can then manually cut those in half vertically to get the 3/4″ finished strips I want to use for sashing. And then (!!!) I can use the die to cut 4 1/2″ squares (4″ finished) — if I am careful — to subcut the strips into 4 1/2″ lengths to match the size of squares I’m going to use in the quilt! Stay tuned…guess what I’m going to do today!
So, with that I am going to sign off and go play with my new fabric and toys!
Well today sure started off well…. got an email from curator and exhibit organizer extraordinaire Donne DeSoto that my Snowy Owl, from Acadia National Park, will be on display at the Library of Congress soon! Here’s the LoC’s information on the exhibit–I SO wish I lived close enough to go see it!
Here’s my owl, based on photographs I took at nearby Clarry Hill Ridge. Of course I had to pick something from Acadia National Park, here in Maine. The fabrics are my hand dyes, include a little bit of paint, and lots of threadwork!
This quilt is part of the Inspired by the National Parks exhibit which debuted in the National Parks Centennial Year. The exhibit will finish its phenomenal run in February at the Mancuso Brother’s Mid-Atlantic show. Donna told me the exhibit has been to THIRTY ONE venues in the three years it has traveled! That is astounding! So many thanks to Schiffer Publishing for putting out the tome with all our quilts and to the other participants. But most of all, special thanks to Donna. I can’t even begin to imagine how much work it is to keep tabs on so many quilts and get them traveling so many places for multiple years. THANK YOU DONNA!
I mentioned earlier that I am DELIGHTED to have been selected as a Michael Miller Brand Ambassador for 2020. As part of that we received, just before Christmas (Squee!), a box of goodies to use. I cannot WAIT to get into the studio to play. As a reward for getting all the gift wrapping and prep actually done before the 24th, I treated myself to opening the box on December 23rd, but waited until today to post and share the joy.
There are so many goodies in this package I hardly know where to start, but since I am prepping for a new 3-day workshop, Exploring Paint on Cloth (details here) August 5-7 at ProChemical and Dye in Massachusetts, I think I’ll start with the Krystal and some of my thermofax screens and paint!
These are the “color cards” for this year, and OH MY what joy awaits inside. It’s going to be a FUN year!Here’s those color cards opened up. Top to bottom: Fairy Frost, Marbles, Krystal and Cotton Couture–all 214 colors!!!!!!! SWOON!
Thanks to Michael Miller Fabrics @michaelmillerfabrics for selecting me. Can’t wait to get started on my projects!
Sewing machine companies are always coming out with new models, most of which are incrementally different from before. But every 10-15 years, Janome re-thinks the machine from all angles and comes up with something that is a major leap–and worth considering adding to your studio. The Janome 6600 was such a machine (circa 2004/5), and the new M7 Continental may well go down as one of The Best Sewing Machines Ever (in any brand!), and given the quality of Janome’s machines that is a high standard.
The Janome M7 Continental is a quantum leap in a sewing machine. Even if you aren’t in a market for a new machine, it is worth taking a look at this model. You might have something new on your wish list!
I have been dying to share with you the things I’ve been making, but most of them are Christmas gifts, so I can’t yet. But I made myself the York Pinafore from Helen’s Closet Patterns, so now I can finally tell you about this wonder with the dress as my example.
In my new “Pinafore” (which I would have called a jumper when I was a kid) in front of the Christmas tree. I’m particularly chuffed about how well the M7 and I worked as a team to get those pockets PERFECTLY placed to have the design flow.
When Janome comes out with a new machine, every single time I think “oh, I can’t give up the loaner I have” (I’m beyond fortunate to be a Janome Artisan so I get to try out their brilliant machines year after year), nothing can be better than this one. And then the new one is even better. Every single time they add new features that make me wonder “oh gosh why didn’t I realize that would be so wonderful.” The M7 is even MORE SO….read on!
The first thing I did, after cutting out the pattern, was to make a lining. I knew that using flannel that I intended to wear over leggings meant that the dress would stick like velcro. Fiddlehead Artisan Supply had a fabric I’ve not used before, Bemberg Rayon, for linings. The bolt end says dry clean, but we all know that can be ignored sometimes. I just bought an extra quarter yard to accommodate shrinkage and tossed it in a wash with hot water wash, cold water rinse, and hot dryer so it would do whatever shrinking it planned to do.
Then I cut, pinned, and started sewing. I probably should have used a thinner needle and the walking foot. I didn’t need to! The feed on this machine is so good that I had no issues going from thick flannel to silky thin rayon! Because rayon ravels, I used the quarter inch piecing foot to create a narrow seam that I turned into a French Seam.
A French seam is really a seam inside of another seam that completely encloses the raw edges. It is typically found in high end garments and used on fabrics that ravel.
Once you have sewn the first seam, you press it as stitched to set the seams. It helps the thread sink into the cloth. Then you press the seam *open* which facilitates turning.
Then you fold the seam right along the stitching to create a “knife edge.” The best way to get the line perfectly on the edge is by pressing open (photo above) and then pressing flat. You can see how crisp and clean the edge is.
I used the quarter-inch foot with the edge guide but moved the needle to the left to 3/8″ from the edge to achieve this perfect seam. In this photo you can see the quarter inch encased and perfect stitching. The rayon won’t ravel ever!
Here I’m matching the scraps and the front of the pinafore so I can cut the pocket pieces to exactly match!
Getting the design lined up perfectly to cut a matching piece for the pocket.
Here I’m stitching in the ditch for the opening of the pocket. I decided to outline the entire pocket with binding. I used the M foot and stitch 15 to overcast the edges as I did the gift bag in yesterday’s post. There are many ways to stitch in the ditch, including an edge-stitch foot that is included with most Janome machines, but personally I find I get my best results using the open-toe F-2 which offers the best visibility. I move the needle to the far right, set the right edge of the foot on the bias, and can get absolutely snug up next to the bias trim.
Now THAT is “stitching in the ditch.”
Throughout the process the M7 handled flawlessly–I mean FLAWLESSLY!
I can’t wait to show you more of what it can do.
Janome’s new slogan is Reliability by Design….I stopped to think about it: I have been sewing on Janome machines since 2003 and not once–let me repeat that, NOT ONCE– have I had an issue that was due to the machine. Once or twice due to operator error, but really, the machines have been utterly, totally and completely reliable. And each one gets better.
Lining done and waiting for the dress to be made.
For hemming, I use the same foot and process, just move the stitch to the far left and adjust the needle drop (the Janome’s have so many needle positions you can get it perfect!). Because I have the rayon lining tucked inside the hem of the flannel outside, and because flannel is loosely woven and really quite stretchy, I use a bamboo skewer to press down on the hem. This compresses the hem, keeps it from rolling up, and controls the stretch. I hold the skewer in place and let the fabric feed underneath it–the tip of the skewer never gets up near the needle. The outstanding feed mechanism on the M7 meant I didn’t need to put on the AcuFeed at all… I couldn’t believe how easy it was!Here’s the inside: all seams contained between the lining and fashion (!) fabric/flannel. I tucked the lining dress inside the flannel dress and basted at the neckline and sleeves. The pattern calls for using bias a narrow facing, but I chose to go quilty and have the grey accent the edges. Then, very carefully because lining is so slippery, I measured the hem and tucked the lining inside (instead of having it hang loose as is more common) and hemmed the dress.Dress from the back. If you are curious, put York Pinafore in the search box and Pinterest…SO many cute ideas, fabulous on a wide range of body types, and fast to make. I can see using a quilting cotton for a fun summer dress with tank or T underneath, and corduroy for winter.
This new M7 Continental Janome is really something else, and although I am a Janome Artisan and affiliated, I would say all this if I had bought this machine at full retail. I’ll take you through some of the other marvelous things it can do in January and February. In the meantime, another small but marvelous detail: the thread stand has a COLLAPSING antenna.
Here’s the machine again…it’s hard to see in the clutter of my room, but there is a thread antenna on the right rear of the machine.
The thread antenna is telescoping, meaning you can push it down and then cover up your machine with the very good quality included cover! WOOT! PS: It also comes with a great extension table with a drawer in it, but even with its vast size (more on that later), I wanted to set it into my table. I cut rigid foam core to fill in the gaps. The mother of invention!
(1).png){kind=small}
.png){kind=small}
.png){kind=small}
