It’s a miracle…sewing for pure fun! Last summer I ordered the PDF download of this Eva Dress pattern by Tessuti Fabrics in Australia (don’t ask me what delightful rabbit hole I fell into that led me to a fabric shop half-way around the world). I had 2 1/2 yards of art quilter Leslie Tucker Jenison’s fantastic Warehouse District design printed on Kaufman’s Essex cotton-linen blend, a perfect weight for this jumper (there’s also a short sleeve version). Be sure to see the short video below!

The pattern is a PDF download from a fabric store in Australia. You can print at home and tape the pages together or print at a local or online copy/print shop onto A0 (about 36″ wide) paper, which is way easier! I use medical exam table paper (cheap!) to make pattern tissues, which preserves the multi-size pattern. I am a US ready-to-wear size 12 or between a Medium and Large. In this pattern, I chose the Large. It is fitted in the bodice with wearing ease but not a lot of extra room, with a roomy skirt.

I made three/four modifications:

• Added a very small dart coming in from the armhole, about 3″ away from the side seam, because the armhole gapped slightly. It is only 1/4″ wide and about 2″ long. As I am small-busted, and there isn’t a ton of room, I suggest making a muslin just for the bodice or cutting the top a bit oversized and fitting it carefully especially if you usually need to make a full bust adjustment. Pick a mid-skirt pattern piece that corresponds in size to the bottom of the bodice, then grade the sides to match your usual desired size.
• Because I live in Maine where it is often cool (or cold), I wanted to be able to wear a shirt underneath, so I lowered the bottom of the armhole by 1/2″ (a bit more than 1 cm), tapering to 2″ on either side (5 cm).
• I lengthened the pocket by about 2″ so I could slide my large iPhone in and there would be no risk of it falling out. My fingertips just brush the bottom of the pocket.
• The fourth change I ended up not making: I was concerned when I measured the circumference of the hem that I wouldn’t be able to take large steps. I widened out the bottom, then basted along the original seam line. It was just fine, so I trimmed away what I had added because it wasn’t needed.

If you want a short dress, perhaps just above knee length, without the cocoon or bubble shape, it would be pretty easy to lengthen the mid-skirt and just make it that way.

The pattern calls for 3 1/4 yards for a size Large. Well, I had 2 1/2 yards! I knew I could make the bias for finishing the armholes, neck and hem out of a quilting cotton, and I JUST barely managed it because the fabric did not have a one-way pattern. One pocket piece isn’t quite on grain, but so what? I had very few scraps left!

I celebrated the finish (yesterday) by wearing it to the first in-person post-COVID meeting of our local quilt group this morning!

I’ve posted some in progress pictures on social media, but at long last the cushions are done, and oh my what an improvement!

This is what it looked like before. Furniture nice, fabric: definitely not my style!

Apparently I really dislike the old cushions so much it took searching in 4 years of summer photos to find a single one with the old striped cushions!

Thanks to a suggestion from Diana Feit on FB, I cut a pool noodle in half and used that arched inside the settee back cushions to fill them out. I had already cut a 3″ wide strip from the egg crate foam, smooth side out, and then used the foam arched from one bottom corner to the other to fill that out. Worked like a charm. Also, notice those DEEP zipper plackets. The place is centered on the gusset, and there are “zipper garages”–little pockets on either end to conceal the zipper pull. These deep plackets use a bit more fabric, but they cover the zipper SO much better that I always make them. Last year about this time I did a blogpost tutorial on one of my Michael Miller Fabrics brand ambassador projects here and here. Click on those links for details on the how–the process is exactly the same.

So there we are….now all I need to do is MAKE TIME to sit on the porch (once it warms up, even with the electric throw it was kinda nippy out there two days ago, then it got colder!). But summer IS coming and I intend to enjoy some Porch Time!

Back in 2013 I did a post on this subject, and decided it was high time to update it! So here you go. There is a downloadable PDF for you to enjoy; it’s also listed on my Resources page.

Sharing is a good thing, so today I want to share some of my favorite things: products that I use and recommend.  If you discover a link is no longer working, please let me know by leaving a comment or using the Contact Me page. Since this list is quite long, here is what you’ll find below, my stuff first (sorry) then alphabetical order:

• Threadwork Unraveled, my book about all things thread
• Art Quilt Design from Photo to Threadwork video workshop
• The Art of Sarah Ann Smith, so far
• Big Design Wall
• Clover seam ripper
• Clover needle threader
• Famore Cutlery Bent-tip tweezers
• Heidi Proffetty’s insanely sharp tweezers
• Janome M7 Continental Sewing Machine
• Karen Kay Buckley’s Scissors
• Mistyfuse Adhesive Web
• Mistyfuse Goddess Sheets
• Mistyfuse Transdoodle 
• Panasonic Titanium Non-stick Iron
• Running with Scissors bag and byAnnie’s patterns
• Textile Paints
• Val Webb, art teacher extraordinaire
• Valerie Hearder—jumbo non-stick press sheeting
• Wool Felt ironing pad

Threadwork Unraveled by me, Sarah Ann Smith

My book is about all things thread.  You’ll learn everything you need to know about thread, from how it is made to what will make your life easier, and your quilting better!  The book is organized in three sections:  The Basics, Applique, and Quilting, and is designed to be a reference book you’ll come back to again and again.  You’ll learn how needles, tension, your workspace, sewing machine, stabilizers, and other tools all help you in using all those wonderful threads now available.  I’ll help you understand how and why certain tools and notions work best and when another option is a better choice.  Click here to read more and to order.  Now out of print, it is still a valuable reference tool.  I have a number of new copies and you may be able to find it online / used elsewhere.

Art Quilt Design from Photo to Threadwork 

The complete cover of my video workshop, back when it was a dvd, Art Quilt Design from Photo to Threadwork with Fabric Collage and Machine Quilting.  Order the download from Quilting Arts here.  https://www.interweave.com/product/art-quilt-design-from-photo-to-threadwork-video-download-2/  

Big Design Wall

There are a ton of different ways to get your own large design wall.  When we moved into this house, my studio was a grim, mostly unfinished basement space.  I did a series of blogposts in 2011 as I transformed it into my dream studio (well, except for moving it upstairs).  Here is the first of the posts… just pop “state of the studio” into the search box.   I designed my space and had my carpenter make a storage area by installing “closet doors” made of two hollow-core doors framed with 1x lumber.  We nested 1” rigid foam insulation into each of the 48” wide doors.  Due to low ceilings, they are a bit under 7 feet tall.  If you don’t have space for a permanent design wall, just a 48” wide piece of rigid insulation—perhaps trimmed to 72” tall—works.  You can stash it behind a door or under a bed.  Trust me, you’ll LOVE having it.  

By Annie’s Stiletto

I’d never really liked stilettos until I met this one.  The grippy texture on the metal point is what clinched it, but the “ironing” flat end and the comfortable grip help, and the two flat sides to the grip area prevent it from rolling off the table—what a concept! Recently I thought I’d somehow lost mine in the studio and almost ordered another.  For once, I found it before I hit Place Order! 

Clover Seam Ripper and Clover Needle Threader

Seam Ripper:  Sharp.  Narrow tip.  Comfortable handle.  Little rubbery bit to grip.  What more can you ask? 

Needle Threader:  I received this as a gift when I lectured for a local area guild.  I didn’t use it for years.  WHY NOT?  It really works.  Has a place to hold the needle that somehow magically turns the needle so the eye is in the correct direction.  Has a thread cutter.  Drape the thread as indicated, push down on the lever and presto, threaded needle!  

Famore Cutlery Bent-Tip Tweezers

I received these as a gift in a teacher goodie bag at International Quilt Festival Houston.   They are AMAZING!   They GRIP.  The have             this bent tip that allows you to use them to slide under a stitch like a seam ripper and pop a stitch.  When you have little pesky bits of thread, they grab and pull them out…they are so sharp they just pinch down tight and WORK. 

Heidi Proffetty Tweezers—wicked sharp! wicked precise!

For years, I used the tip of my scissors, fingers, a skewer or a pin to coax and nudge itty bitty bits of fabric into place on my collaged art quilts.  Then my friend and colleague Heidi Proffetty came up with a better mousetrap:  some ridiculously fine, SHARP, POINTY tweezers to place those little bitty bits into place (she does mosaic quilts and does a lot of fiddly work).  I don’t know how I managed without them!   

Janome M7 Continental Sewing Machine

Astonishingly, I have been affiliated with Janome since 2003.  I am a Janome Artisan, and proud to be associated with them.  Even with that, I’d say all the wonderful things I say about Janome machines if I weren’t.  There is a reason why I have chosen Janomes for my sewing.  Since the 6500 in 2003, with each new machine they send me, I keep thinking they couldn’t get better.  But they do.  The 6600 all those years ago was a giant leap forward, and the M7 is perhaps even more of a qualitative leap into excellence.  The machine is huge, sturdy, easy to use, and performs flawlessly.  And the harp space—that is a 104” x 104” quilt in there!

It started in 2003 when I was frustrated with my then-machine’s balkiness using assorted fun threads.  I wanted to decide what threads to use, not have my machine dictate what I could use because the machine would otherwise crab at me (for example, on that other-brand-machine, it didn’t like it when I used Superior Threads 40-wt poly in the needle and 60-wt  Bottom Line in the Bobbin; ALL the Janomes I have used  handle that with ease).  A huge, Huge, HUGE Thank You to Janome America for their long-term support of me!  I think I’ll go hug my Janome right now!

I have started making a few videos of me using my beloved machine to help you learn and posted them to my YouTube channel, here.  Hope you enjoy! https://www.youtube.com/user/SmithQuilts/videos  

Karen Kay Buckley’s scissors

Honestly, I love and use all of them!  They are well worth the not- expensive price, and will likely soon become YOUR favorites, too. You can find these on Karen Kay Buckley’s website as well as at many shops and online.  The two on the left are “regular” scissors.  The four on the right are the micro-serrated scissors with a non-stick coating (the black ones).  The precision in cutting with the micro-serrated scissors allows amazing control and is key to creating my work. The Purple handles are the first ones and still the first scissors I reach for.  The curved tip on the little red ones is nifty, and I also use the plain (pink and orange) fairly often.  

Mistyfuse Adhesive Web 

I am a complete fan of Mistyfuse products.  I LOVE this fusible web!  It leaves such a light, soft hand, never “expires”, doesn’t gunk up the needle EVER, and works really well.   I also like that it does NOT come packaged with release paper (which in other brands either comes loose too easily, or sticks, or whatever); you use baking parchment or a non-stick press sheet (next item) which is less wasteful than all that release paper, and once you see how to use Mistyfuse, it is infinitely easier!   For most projects you would want either the white or the Ultraviolet; the latter is best for light colored fabrics.  The black has lots of fun uses. 

Mistyfuse Goddess Sheets

Goddess Sheets are non-stick press sheets.  You could use Reynolds Baking Parchment, but these sheets won’t wrinkle and wear out or tear like Baking Parchment.  I’ve been using my press sheets for YEARS–the only wear and tear is where I accidentally sliced off a sliver with my rotary cutter!   I prefer the largest sheets; the Fat Goddess is so named because it allows you to fuse up an entire Fat Quarter (18×22 inches) of fabric without having to move the sheet.  The Holy Cow sheet is 36 x 48 inches!

Mistyfuse Transdoodle Transfer sheets and

Saral Transfer Paper in a roll

To transfer designs, I use Transdoodle or trace; but you could use a light box.  If the fabric is light enough , I can trace by placing the fabric over the design, OR I layer things up with the fabric on the bottom, Transdoodle Transfer paper in the middle, and the pattern on top.  These sheets last a LONG time, can be used over and over and over again.   Available in white, it has a heavier chalk load and last longer than Saral.    Saral is a transfer paper available in art supply stores and online and is available in sheets like Transdoodle and in rolls.  Sometimes you just want a long roll of white for a large design or motif.  You can find Saral  here at Dick Blick among other places..  I will note one caution:  if  like me you forget to test for removability, whenever you use ANYTHING yellow, TEST!  It doesn’t like to let go of some fabrics!  I stick to just white or blue.

Panasonic Non-Stick Titanium Coated Iron

I have had several of these over the years—one fell to the cement floor one time too many (I filed off the broken tip and kept using it tho!).  The other I used so much I wore off (after multiple years) the finish on the sole plate!   Oh how I LOVE LOVE LOVE this iron! I think iron manufacturers think non-stick means doesn’t stick to clean fabric.  These you can melt fusible onto them directly and wipe it clean with a paper towel!  No more iron cleaner fumes!  

The key word appears to be Titanium–-other non-stick irons don’t work the same way!  There are several models available at the moment on Amazon, and in various wattages…I’m going to order the 1800 as the one I have now is 1200.  In 2020 I tested various other irons including one that is “titanium” but none worked nearly as well as the Panasonics have over the years.  For the price of four or five tubes of iron cleaner, you get an iron you can wipe clean!   Mo’ bettah!  Put “Panasonic Titanium Non-stick Iron” into the Amazon search box for a current listing.

Running with Scissors bag and byAnnie’s patterns

Initially I made this as a “travel” case for teaching on the road.  In March 2020.  When the world screeched into a parallel universe with the arrival of the COVID pandemic.  As I type, it has never been on the road.  It has also never been put away.  I LOVE this bag:  it stays open on my worktable and is so easy to use!  I enlarged the size about 1” in both directions so I could fit a 9×12” cutting mat inside the outside pockets (or corrugated plastic) so that I can stand it up without having to make and use the companion bag.  This is not a fast project, but the instructions, as I have learned from other byAnnie patterns, are brilliant.  Take it one step at a time, use the top-quality products from byAnnie (not affiliated, just a fan-girl), and you’ll LOVE it. https://www.byannie.com/running-with-scissors

Superior Threads

There are many brilliant threads out there now, that is one of the things that prompted me to write my book:  so that folks could understand how to use them.  Since I teach, I try to be fair, honest, and give all companies an equal chance.  There are a number of companies that make threads I use, respect and like:  Superior Threads, Aurifil, Madeira, Isacord and others.   But Superior is far and away the best at striving to educate the public.   I highly recommend the Education section of the Superior Threads website.   As well, they make brilliant quality threads, stand behind their products, and have great customer service.   When I switched from quilting with only cottons to using a wide range of threads (thanks to my Janome’s ability to do so without a grump), I decided to build my stash to “one of each please”–the thread equivalent of the BIG box of crayons!  I did so 10 or 12 spools at a time, and having a wide range makes it so much easier for me to do my thread-coloring.

Textile Paint 

You could spend years having fun with surface design, textile paints, drawing materials and dyes.   My DVD just mentions the use of transparent Textile Paints.

There are many, Many, MANY types of textile paints including opaque, transparent, metallic and so on.  You’ll find different ways to use them, too. All of the major brands work but have different properties.  Some are creamier, more like sour cream that is well stirred, but others are more like a dense yogurt, almost spreadable Which to pick depends on your personal preferences and what you intend to do with the paint:  direct paint, stencil, screen print.  Yeah, I know.  Helpful as mud LOL!   

My favorites now and which I sell on my website are ProChemical & Dye’s ProFAB and ProSilk paints.  The ProFAB are sour cream consistency and great for stamping, screen printing (my fave) and direct painting.  The ProSilk can, despite their name, be used well on cotton.  They are an ink-like consistency and you can almost use them in a watercolor-y way.  You can see my custom kits on my website store, here. Or click on the photo which is a hotlink to the item.

Val Webb, art teacher extraordinaire

In late 2012 I took Val’s first online class.  I have no idea how I learned about her, but I am so glad I did.  I have learned SO MUCH from her.  I have taken other online classes, but the most important thing in any representational art form is learning to see, and that I what she has taught me.  My first workshop, I could tell something was maybe a bit amiss, but not what.  Over various workshops over the years (several pictured at right, that’s Val’s art), I’ve grown to where I can study and compare, using tips and tricks and techniques.  For example, I am not a fan of the waxiness of colored pencils, but learning the slow, repetitive nature of shading with them has taught me how to layer dyes and textile paints to create what I want in my artwork.  If you’d like to see some of the blogposts I’ve done over the years about my work in her classes—the vulture is one of my favorites–click here.  The skills of seeing and thinking translate directly for me.  After a couple-year break for busy life, I am now signed up for my 8^th class with her.  So I encourage you to check out Val’s site and consider her classes.  https://valwebb.wordpress.com

Valerie Hearder non-stick pressing sheets, ginormous

Some years back, after a good teaching year, I finally indulged:  not one but TWO VAST non-stick pressing sheets, which I ordered from art quilter Valerie Hearder, who lives in the Canadian Maritimes.  Val says “I sell the wide teflon by the yard and can sell any length.  Check out www.valeriehearder.com.  I have 18” wide and I also have 37” by any length. Note that my prices are in Canadian $ which is a big saving for Americans.  In the pre-COVID days I had no trouble ordering my two 36/7 x 72” sheets.  One lives on my Big Board (a 22×60” ironing surface) and the other on my design wall.  When I do Really Big quilts, I can pin both up on my design wall (see above!).  Expensive, but if you do a ton of fusing and tend to work big, worth it.

Wool Felt Ironing Pad

When I was a kid, ironing boards came with a real wool felt pad under the cloth.  Things ironed beautifully.  Then things went to polyester and synthetic foam and, well, yuck.  The quilting world recently rediscovered the joy of a nice wool press surface.  As usual, if you stick the word quilt on the product, the price doubles, triples or more.  So I did a little sleuthing.  I knew of a felt manufacturer so I went to see if they had the wool pads.  THEY DO.  And they will sell to the public.  It helps if you get a bunch of friends together and do a group order.  Their ½” wool felt is 72” wide and is sold by the yard.  Some friends from my local guild and I got together and did a group order for 2 yards.  Rather than me try to cut the thick felt with a linoleum knife (and end up hospitalized), I paid the modest fee to have them cut the pads.  One woman and I each wanted a 72” x 22” wide piece each.  The rest we had cut into pieces 14 x 18”.  Each yard cut that way yielded one large and three smaller pieces.  You can have it cut into whatever size works.  We ordered the F-7 Gray ½” thick felt.  Shipping added to the cost, but I think the 14×18” pieces ran about $33 including cutting and shipping.  Current prices for about the same size are a bit lower than two years ago, and are roughly $40, and for the large ones, my 22×72 cost me about $98, while the current prices for 20×60 are around $112 on Amazon.  https://www.sutherlandfelt.com/felt/pressed-wool-felt/

Over the course of the year I’ve shared progress on this quilt:

• First, there was learning to use the AccuQuiltGO! which I blogged about here. It was a different block, but the easy applies.
• Then there is the PIECING of CURVES: see the blogpost here or go directly to the video on my YouTube Channel here.
• Now there is the quilting video (that covers a couple other things), embedded below and share-able on my YouTube Channel here.

Full disclosure: I have proudly been a Janome Artisan since 2003, and this year am a Michael Miller Fabrics Brand Ambassador for 2020. MMF provided the fabric and we were given, as part of being a brand ambassador, an AccuQuiltGo and several dies. To my surprise I enjoyed the process so much I have purchased both the Winding Ways and Crossed Canoe dies. Stay tuned for more!

Next came machine quilting. I worked on that a while back–I did end up teaching for the Mancuso Online Quiltfest in August and will do a Threadcoloring the Garden workshop in October! More info on that soon! In this video I’m practicing making a video, demonstrating at the machine, and it just happens to be walking foot quilting (fast! easy!) on my beloved Janome M7. Even if I had paid full price instead of being a Janome Artisan I’d rave about this machine’s wonderfulness! Their new slogan, Reliability by Design, is really true!

Then, the hand quilting and the finishing!

I haven’t done any hand stitching in a thousand years, but nearly two years ago I bought matching green thread from aurifil in piecing/light quilting weight and a heavier 12-wt that is about the size of a light perle cotton or 6-strands of floss. I LOVE IT…and it went so fast! I can remember clearly sitting on the porch in early summer, something to watch on the iPad, stitching away.

I wanted to repeat the orange batik in the center on the edges, but using it as the binding was too much. I instead inserted a tiny stitched down “reveal” that is a scant 1/8″ just inside the white binding. Can I also put in a plug for Michael Miller’s Cotton Couture solids? The quality of the base cloth is SO GOOD! And the consistency in color / dye lots over the years is really amazing. I dye fabric and know how hard it is to get perfect matches from batch to batch and it does.

I taught the half day version of my bindings workshop at the Mancuso Online Quiltfest in June and may do so again in the new year. I am scheduled to teach and have an exhibit of my work at the Mid-Atlantic Quiltfest in Virginia in February, but at this point who knows if it will be in person or online! I promise I will teach the bindings (full or half day) again in the new year online, just need to figure out when. My students in June had GREAT results online so it works online too!

Anyway, I hope you’ve enjoyed my 2020 detour back to my quilty roots. Coming soon, a new art quilt!

Precision piecing has never been my strong suit, but I am — like Michaelangelo at age 80 — still learning. One of the things I’ve learned is that it is OK to use specialty tools like the AccuQuiltGO! and byAnnie’s stiletto. Thank you to Michael Miller, for whom I am a Brand Ambassador this year) and Janome America for having me as an Artisan. For me, careful cutting for squares, rectangles and triangles isn’t too TOO challenging (as long as I’m paying attention which is never to be take for granted LOL). But CURVES? Not so much.

Back in May, I shared a video that tells yo about the amazing (Heavenly Perfection?) HP presser foot and throat plate, herhttps://www.sarahannsmith.com/weblog/?p=13206e. If you have a Janome with this option and haven’t tried it out, DO! Go watch the video… it’s a brief but I hope helpful mini tutorial. The video is also on my YouTube channel, here. I’ve been doing a bit more with brief videos…looks like about one a month. I’ll have another later this month about using the blind hem stitch for some slacks I made–you can subscribe to the channel.

Here’s a quick video of me using the oh-so-wonderful HP accufeed foot and throat plate from Janome, on my M7. Thanks to Kimberly Einmo who shared her love of this accessory at the 2018 Janome Education Summit! Like I said…there is ALWAYS more to enjoy learning.

The stiletto from byAnnie.com is here.

Hope you’ve enjoyed my detour from art quilting. I’ve actually needed a break to recharge myself, and this has been DELIGHTFUL. I’m thrilled with the finished quilt… will post it in about a week or so.

Full disclosure: I’ve been a Janome Artisan for 16 years, and am forever grateful for their support and machines. I’m a Michael Miller Fabrics (MMF) Brand Ambassador for 2020; the batiks and white fabric were donated as part of that ambassadorship. The AccuQuiltGO! was a GIFT (!!!!) as part of the MMF thing, and I purchased the Winding Ways die once I realized that wow, I could USE this machine! Whooda thunk it? Well, I should have. Having FUN! And lastly, thanks to byAnnie.com; their donations to the Teacher Goodie Bags in Houston one year netted me that awesome (and not expensive) Stiletto!